COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
CHAPTER 6 TROUBLESHOOTING
6-152
5.1.1 Pickup Assembly
Pickup assembly
1) Is the paper curled or wavy?
YES: Replace the paper.
Advise the user on the correct method of storing paper.
2) Try paper of a recommended type. Is the problem corrected?
YES: Advise the user to use paper of a recommended type.
DC controller PCB, Pickup clutch
3) During printing operation, does the pickup roller of the selected
source of paper (cassette, deck, manual feed tray) rotate?
NO: See the discussions under each fault.
Pickup roller, Guide plate
4) Is the pickup roller deformed or worn?
YES: Replace the pickup roller.
NO: Check the guide plate for deformation.
To Next Page
Loading...
Need help?
General
