Cisco Catalyst 3650 Series User Manual

debug sw-vlan
To enable debugging of VLAN manager activities, use the debug sw-vlan command in privileged EXEC
mode. To disable debugging, use the no form of this command.
debug sw-vlan {badpmcookies| cfg-vlan {bootup| cli}| events| ifs| management| mapping| notification|
packets| redundancy| registries| vtp}
no debug sw-vlan {badpmcookies| cfg-vlan {bootup| cli}| events| ifs| management| mapping| notification|
packets| redundancy| registries| vtp}
Syntax Description
Displays debug messages for VLAN manager incidents of bad port manager
cookies.
badpmcookies
Displays VLAN configuration debug messages.cfg-vlan
Displays messages when the switch is booting up.bootup
Displays messages when the command-line interface (CLI) is in VLAN
configuration mode.
cli
Displays debug messages for VLAN manager events.events
Displays debug messages for the VLAN manager IOS file system (IFS). See
debug sw-vlan ifs, on page 1011 for more information.
ifs
Displays debug messages for VLAN manager management of internal VLANs.management
Displays debug messages for VLAN mapping.mapping
Displays debug messages for VLAN manager notifications. See debug sw-vlan
notification, on page 1012 for more information.
notification
Displays debug messages for packet handling and encapsulation processes.packets
Displays debug messages for VTP VLAN redundancy.redundancy
Displays debug messages for VLAN manager registries.registries
Displays debug messages for the VLAN Trunking Protocol (VTP) code. See
debug sw-vlan vtp, on page 1014 for more information.
vtp
Command Default
Debugging is disabled.
Command Modes
Privileged EXEC
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
1009
debug sw-vlan

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English