Cisco Catalyst 3650 Series User Manual

debug platform pm
To enable debugging of the platform-dependent port manager software module, use the debug platform pm
command in privileged EXEC mode. To disable debugging, use the no form of this command.
debug platform pm {all| counters| errdisable| fec| if-numbers| l2-control| link-status| platform| pm-spi|
pm-vectors [detail]| ses| vlans}
no debug platform pm {all| counters| errdisable| fec| if-numbers| l2-control| link-status| platform| pm-spi|
pm-vectors [detail]| ses| vlans}
Syntax Description
Displays all port manager debug messages.all
Displays counters for remote procedure call (RPC) debug messages.counters
Displays error-disabled-related events debug messages.errdisable
Displays forwarding equivalence class (FEC) platform-related events
debug messages.
fec
Displays interface-number translation event debug messages.if-numbers
Displays Layer 2 control infra debug messages.l2-control
Displays interface link-detection event debug messages.link-status
Displays port manager function event debug messages.platform
Displays port manager stateful packet inspection (SPI) event debug
messages.
pm-spi
Displays port manager vector-related event debug messages.pm-vectors
(Optional) Displays vector-function details.detail
Displays service expansion shelf (SES) related event debug messages.ses
Displays VLAN creation and deletion event debug messages.vlans
Command Default
Debugging is disabled.
Command Modes
Privileged EXEC
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
301
debug platform pm

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English