Cisco Catalyst 3650 Series User Manual

show flow exporter
To display flow exporter status and statistics, use the show flow exporter command in privileged EXEC
mode.
show flow exporter [broker [detail| picture]| export-ids netflow-v9| [name] exporter-name [statistics|
templates]| statistics| templates]
Syntax Description
(Optional) Displays information about the state of the broker for the Flexible
NetFlow flow exporter.
broker
(Optional) Displays detailed information about the flow exporter broker.detail
(Optional) Displays a picture of the broker state.picture
(Optional) Displays the NetFlow Version 9 export fields that can be exported
and their IDs.
export-ids netflow-v9
(Optional) Specifies the name of a flow exporter.name
(Optional) Name of a flow exporter that was previously configured.
exporter-name
(Optional) Displays statistics for all flow exporters or for the specified flow
exporter.
statistics
(Optional) Displays template information for all flow exporters or for the
specified flow exporter.
templates
Command Default
None
Command Modes
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SE
Examples
The following example displays the status and statistics for all of the flow exporters configured on a device:
Device# show flow exporter
Flow Exporter FLOW-EXPORTER-1:
Description: Exports to the datacenter
Export protocol: NetFlow Version 9
Transport Configuration:
Destination IP address: 192.168.0.1
Source IP address: 192.168.0.2
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
462
show flow exporter

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English