Cisco Catalyst 3650 Series User Manual

show monitor session
To display information about all Switched Port Analyzer (SPAN) and Remote SPAN (RSPAN) sessions, use
the show monitor session command in EXEC mode.
show monitor session {session_number | all | erspan-source | local | range list | remote} [detail]
Syntax Description
The session number identified with the SPAN or RSPAN session.
The range is 1 to 68. However if this switch is stacked with
Catalyst 2960-S switches, you are limited to a combined
maximum of two local SPAN sessions and RSPAN source
sessions, and the range is 1 to 66.
session_number
Displays all SPAN sessions.all
Displays only source ERSPAN sessions.erspan-source
Displays only local SPAN sessions.local
Displays a range of SPAN sessions, where list is the range of
valid sessions. The range is either a single session or a range of
sessions described by two numbers, the lower one first, separated
by a hyphen. Do not enter any spaces between comma-separated
parameters or in hyphen-specified ranges.
This keyword is available only in privileged EXEC
mode.
Note
range list
Displays only remote SPAN sessions.remote
(Optional) Displays detailed information about the specified
sessions.
detail
Command Modes
User EXEC (>)
Privileged EXEC(#)
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
The maximum local ERSPAN source session limit is 8.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
526
show monitor session

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English