Cisco Catalyst 3650 Series User Manual

debug nhrp
To enable Next Hop Resolution Protocol (NHRP) debugging, use the debug nhrp command in privileged
EXEC mode. To disable debugging output, use the no form of this command.
debug nhrp [attribute | cache | condition {interface tunnel number | peer {nbma {ipv4-nbma-address |
nbma-name | ipv6-nbma-address} } | umatched | vrf vrf-name}| detail | error | extension | group | packet
| rate]
no debug nhrp [attribute | cache | condition {interface tunnel number | peer {nbma {ipv4-nbma-address
| nbma-name | ipv6-nbma-address} } unmatched | vrf vrf-name}| detail | error | extension | group | packet
| rate ]
Syntax Description
(Optional) Enables NHRP attribute debugging
operations.
attribute
(Optional) Enables NHRP cache debugging
operations.
cache
(Optional) Enables NHRP conditional debugging
operations.
condition
(Optional) Enables debugging operations for the
tunnel interface.
interface tunnel number
(Optional) Enables debugging operations for the
non-broadcast multiple access (NBMA) network.
nbma
(Optional) Enables debugging operations based on
the IPv4 address of the NBMA network.
ipv4-nbma-address
(Optional) NBMA network name.
nbma-name
(Optional) Enables debugging operations based on
the IPv6 address of the NBMA network.
The IPv6-address argument is not supported
in Cisco IOS XE Denali 16.3.1.
Note
IPv6-address
(Optional) Enables debugging operations for the
virtual routing and forwarding instance.
vrf vrf-name
(Optional) Displays detailed logs of NHRP debugs.detail
(Optional) Enables NHRP error debugging operations.error
(Optional) Enables NHRP extension processing
debugging operations.
extension
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
145
debug nhrp

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English