interface Ethernet 1
ip address dhcp client-id GigabitEthernet 1/0/1
The DISCOVER message sent by a device configured as shown in the following example would contain the
MAC address of Ethernet interface 1 in the client-id field, and the value def in the option 12 field.
hostname abc
!
interface Ethernet 1
ip address dhcp client-id GigabitEthernet 1/0/1 hostname def
Related Commands
DescriptionCommand
Configures a DHCP address pool on a Cisco IOS
DHCP server and enters DHCP pool configuration
mode.
ip dhcp pool
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
169
ip address dhcp
To Next Page
Loading...
Need help?
General