show tech-support
To automatically run show commands that display system information, use the show tech-support command
in the privilege EXEC mode.
show tech-support [cef| cft| eigrp| evc| fnf| ipc| ipmulticast| ipsec| mfib| nat| nbar| onep| ospf| page|
password| rsvp| subscriber| vrrp| wccp]
Syntax Description
(Optional) Displays CEF related information.cef
(Optional) Displays CFT related information.cft
(Optional) Displays EIGRP related information.eigrp
(Optional) Displays EVC related information.evc
(Optional) Displays flexible netflow related information.fnf
(Optional) Displays IPC related information.ipc
(Optional) Displays IP multicast related information.ipmulticast
(Optional) Displays IPSEC related information.ipsec
(Optional) Displays MFIB related information.mfib
(Optional) Displays NAT related information.nat
(Optional) Displays NBAR related information.nbar
(Optional) Displays ONEP related information.onep
(Optional) Displays OSPF related information.ospf
(Optional) Displays the command output on a single page at a time. Use the Return
key to display the next line of output or use the space bar to display the next page
of information. If not used, the output scrolls (that is, it does not stop for page
breaks).
Press the Ctrl-C keys to stop the command output.
page
(Optional) Leaves passwords and other security information in the output. If not
used, passwords and other security-sensitive information in the output are replaced
with the label "<removed>".
password
(Optional) Displays IP RSVP related information.rsvp
(Optional) Displays subscriber related information.subscriber
(Optional) Displays VRRP related information.vrrp
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
124
show tech-support
To Next Page
Loading...
Need help?
General