Cisco Catalyst 3650 Series User Manual

redundancy
To enter redundancy configuration mode, use the redundancy command in global configuration mode.
redundancy
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Global configuration (config)
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
The redundancy configuration mode is used to enter the main CPU submode, which is used to enable the
standby switch.
To enter the main CPU submode, use the main-cpu command while in redundancy configuration mode.
From the main CPU submode, use the standby console enable command to enable the standby switch.
Use the exit command to exit redundancy configuration mode.
Examples
This example shows how to enter redundancy configuration mode:
Device(config)# redundancy
Device(config-red)#
This example shows how to enter the main CPU submode:
Device(config)# redundancy
Device(config-red)# main-cpu
Device(config-r-mc)#
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
856
redundancy

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English