Cisco Catalyst 3650 Series User Manual

show redundancy
To display redundancy facility information, use the show redundancy command in privileged EXEC mode
show redundancy [clients| config-sync| counters| history [reload| reverse]| slaves[slave-name] {clients|
counters}| states| switchover history [domain default]]
Syntax Description
(Optional) Displays information about the redundancy facility client.clients
(Optional) Displays a configuration synchronization failure or the ignored
mismatched command list (MCL). For more information, see show redundancy
config-sync, on page 869.
config-sync
(Optional) Displays information about the redundancy facility counter.counters
(Optional) Displays a log of past status and related information for the
redundancy facility.
history
(Optional) Displays a log of past reload information for the redundancy facility.history reload
(Optional) Displays a reverse log of past status and related information for the
redundancy facility.
history reverse
(Optional) Displays all slaves in the redundancy facility.slaves
(Optional) The name of the redundancy facility slave to display specific
information for. Enter additional keywords to display all clients or counters
in the specified slave.
slave-name
Displays all redundancy facility clients in the specified slave.clients
Displays all counters in the specified slave.counters
(Optional) Displays information about the redundancy facility state, such as
disabled, initialization, standby or active.
states
(Optional) Displays information about the redundancy facility switchover
history.
switchover history
(Optional) Displays the default domain as the domain to display switchover
history for.
domain default
Command Default
None
Command Modes
Privileged EXEC (#)
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
865
show redundancy

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English