description (ERSPAN)
To describe an Encapsulated Remote Switched Port Analyzer (ERSPAN) source session, use the description
command in ERSPAN monitor source session configuration mode. To remove a description, use the no form
of this command.
description description
no description
Syntax Description
Describes the properties for this session.
description
Command Default
Description is not configured.
Command Modes
ERSPAN monitor source session configuration mode (config-mon-erspan-src)
Command History
ModificationRelease
This command was introduced.Cisco IOS XE Denali 16.3.1
Usage Guidelines
The description argument can be up to 240 characters.
Examples
The following example shows how to describe an ERSPAN source session:
Switch(config)# monitor session 2 type erspan-source
Switch(config-mon-erspan-src)# description source1
Related Commands
DescriptionCommand
Configures a local ERSPAN source session.monitor session type erspan-source
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
481
description (ERSPAN)