Cisco Catalyst 3650 Series User Manual

show autonomic control-plane
To display information about the autonomic control plane, use the show autonomic control-plane command
in privileged EXEC mode.
show autonomic control-plane [detail]
Syntax Description
(Optional) Displays detailed information.detail
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was introduced.Cisco IOS XE Denali 16.3.1
Examples
To display information about the autonomic control plane:
Device# show autonomic control-plane
VRF Name cisco_autonomic
Device Address FD08:2EEF:C2EE:0:E865:493B:ACFB:7
RPL floating-node, Dag-id = FD08:2EEF:C2EE:0:E865:493B:ACFB:5
Neighbor ACP Channel ACP Security
--------------------------------------------------------------------------------
PID:WS-C3850-24U SN:FCW1934D05Z Tunnel100002 DIKE
To display information about the autonomic control plane in detail:
Device# show autonomic control-plane detail
VRF Name cisco_autonomic
Device Address FD08:2EEF:C2EE:0:E865:493B:ACFB:7
RPL grounded-node, Dag-id = FD08:2EEF:C2EE:0:E865:493B:ACFB:1
Neighbor: PID:WS-C3850-24U SN:FCW1934D05Z
Uptime(Created Time): 00:12:16 ( 2016-07-15 05:38:53 UTC)
Supported ACP Channel: IPv6 GRE Tunnel
Negotiated ACP Channel: IPv6 GRE Tunnel
Tunnel Name Tunnel100000
Tunnel Source Interface ANI1
Tunnel Source FE80::5AAC:78FF:FE09:F383
Tunnel Destination FE80::3A20:56FF:FEF3:7158
Supported ACP Security: IPSec, DIKE
Negotiated ACP Security: DIKE
The following table describes the significant fields shown in the display.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
893
show autonomic control-plane

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English