Cisco Catalyst 3650 Series User Manual

debug flow record
To enable debugging output for Flexible NetFlow flow records, use the debug flow record command in
privileged EXEC mode. To disable debugging output, use the no form of this command.
debug flow record [[name] record-name| options {sampler-table}| [detailed| error]]
no debug flow record [[name] record-name| options {sampler-table}| [detailed| error]]
Syntax Description
(Optional) Specifies the name of a flow record.name
(Optional) Name of a user-defined flow record that was previously
configured.
record-name
(Optional) Includes information on other flow record options.options
(Optional) Includes information on the sampler tables.sampler-table
(Optional) Displays detailed information.detailed
(Optional) Displays errors only.error
Command Modes
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SE
Examples
The following example enables debugging for the flow record:
Device# debug flow record FLOW-record-1
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
422
debug flow record

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English