Gi2/0/3 err-disabled dtp-flap
This is an example of output from the show interfaces interface-id pruning command:
Device# show interfaces gigabitethernet1/0/2 pruning
Port Vlans pruned for lack of request by neighbor
This is an example of output from the show interfaces interface-id trunk command. It displays trunking
information for the port.
Device# show interfaces gigabitethernet1/0/1 trunk
Port Mode Encapsulation Status Native vlan
Gi1/0/1 on 802.1q other 10
Port Vlans allowed on trunk
Gi1/0/1 none
Port Vlans allowed and active in management domain
Gi1/0/1 none
Port Vlans in spanning tree forwarding state and not pruned
Gi1/0/1 none
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
80
show interfaces