Cisco Catalyst 3650 Series User Manual

show platform ip wccp
To display platform-dependent Web Cache Communication Protocol (WCCP) information, use the show
platform ip wccp privileged EXEC command.
show platform ip wccp {cache-engines | interfaces | service-groups} [switch switch-number]
Syntax Description
Displays WCCP cache engines.cache-engines
Displays WCCP interfaces.interfaces
Displays WCCP service groups.service-groups
(Optional) Displays WCCP information only for specified
switch-number.
switch switch-number
Command Modes
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
Use this command only when you are working directly with a technical support representative while
troubleshooting a problem. Do not use this command unless a technical support representative asks you to do
so.
This command is available only if your device is running the IP Services feature set.
Examples
The following example displays WCCP interfaces:
Device# show platform ip wccp interfaces
WCCP Interfaces
**** WCCP Interface Gi1/0/3 iif_id:0x104a60000000087 (#SG:1), vrf:0 Ingress
le_handle:0x565dd208 IPv4 Sw-Label:3, Asic-Label:3
* Service group id:0 type: Well-known token:126 vrf:0 (ref count:1)
Open service prot: PROT_TCP l4_type: Dest ports priority: 240
port[0]: 80
Related Commands
DescriptionCommand
enables web cache service
ip wccp
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
528
show platform ip wccp

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English