Cisco Catalyst 3650 Series User Manual

mdt log-reuse
To enable the recording of data multicast distribution tree (MDT) reuse, use the mdt log-reusecommand in
VRF configuration or in VRF address family configuration mode. To disable this function, use the no form
of this command.
mdt log-reuse
no mdt log-reuse
Syntax Description
This command has no arguments or keywords.
Command Default
The command is disabled.
Command Modes
VRF address family configuration (config-vrf-af) VRF configuration (config-vrf)
Command History
ModificationRelease
This command was introduced.Cisco IOS XE Denali 16.3.2
Usage Guidelines
The mdt log-reuse command generates a syslog message whenever a data MDT is reused.
You can access the mdt log-reusecommand by using the ip vrf global configuration command. You can also
access the mdt log-reuse command by using the vrf definition global configuration command followed by
the address-family ipv4 VRF configuration command.
Examples
The following example shows how to enable MDT log reuse:
mdt log-reuse
Related Commands
DescriptionCommand
Configures the multicast group address range for data
MDT groups.
mdt data
Configures a default MDT group for a VPN VRF.mdt default
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
394
mdt log-reuse

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English