Cisco Catalyst 3650 Series User Manual

Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
To enable AAA accounting identity, you need to enable policy mode. To enable policy mode, enter the
authentication display new-style command in privileged EXEC mode.
Examples
This example shows how to configure IEEE 802.1x accounting identity:
Device# authentication display new-style
Please note that while you can revert to legacy style
configuration at any time unless you have explicitly
entered new-style configuration, the following caveats
should be carefully read and understood.
(1) If you save the config in this mode, it will be written
to NVRAM in NEW-style config, and if you subsequently
reload the router without reverting to legacy config and
saving that, you will no longer be able to revert.
(2) In this and legacy mode, Webauth is not IPv6-capable. It
will only become IPv6-capable once you have entered new-
style config manually, or have reloaded with config saved
in 'authentication display new' mode.
Device# configure terminal
Device(config)# aaa accounting identity default start-stop group radius
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
710
aaa accounting identity

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English