Cisco Catalyst 3650 Series User Manual

domain
Configures the fabric domain and enters fabric-auto-domain configuration mode. The no version of this
command deletes the fabric domain.
domain { default| name name }
no domain
Syntax Description
Configures the default fabric domain and enters fabric-auto domain
configuration mode.
default
Configures a new fabric domain and enters fabric-auto domain configuration
mode.
name name
Command Default
None
Command Modes
Fabric-auto configuration mode
Command History
ModificationRelease
This command was introduced.Cisco IOS XE Denali 16.3.1
Usage Guidelines
We recommend that you use the default domain, unless your network requires you to create a new domain.
This command allows you to enter fabric-auto domain configuration mode where you can configure edge,
control-plane and border devices in the fabric domain.
Examples
Device(config-fabric-auto)#domain default
Device(config-fabric-auto)#domain name exampledomain
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
17
domain

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English