Cisco Catalyst 3650 Series User Manual

show rep topology
To display REP topology information for a segment or for all segments, including the primary and secondary
edge ports in the segment, use the show rep topology command in privileged EXEC mode.
show rep topology [segment segment-id] [archive] [detail]
Syntax Description
(Optional) Specifies the segment
for which to display REP topology
information. The ID range is from
1 to 1024.
segment segment-id
(Optional) Displays the previous
topology of the segment. This
keyword is useful for
troubleshooting a link failure.
archive
(Optional) Displays detailed REP
topology information.
detail
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was introducedCisco IOS XE Denali 16.2.2
Examples
The following is sample output from the show rep topology command.
Device# show rep topology
REP Segment 1
BridgeName PortName Edge Role
---------------- ---------- ---- ----
10.64.106.63 Te5/4 Pri Open
10.64.106.228 Te3/4 Open
10.64.106.228 Te3/3 Open
10.64.106.67 Te4/3 Open
10.64.106.67 Te4/4 Alt
10.64.106.63 Te4/4 Sec Open
REP Segment 3
BridgeName PortName Edge Role
---------------- ---------- ---- ----
10.64.106.63 Gi50/1 Pri Open
SVT_3400_2 Gi0/3 Open
SVT_3400_2 Gi0/4 Open
10.64.106.68 Gi40/2 Open
10.64.106.68 Gi40/1 Open
10.64.106.63 Gi50/2 Sec Alt
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
349
show rep topology

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English