Cisco Catalyst 3650 Series User Manual

show ip pim bsr-router
To display information related to Protocol Independent Multicast (PIM) bootstrap router (BSR) protocol
processing, use the show ip pim bsr-router command in user EXEC or privileged EXEC mode.
show ip pim bsr-router
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
User EXEC
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SE
Usage Guidelines
In addition to auto-rp, the BSR RP method can be configured. After the BSR RP method is configured, this
command will display the BSR router information.
Examples
The following is sample output from the show ip pim bsr-router command:
Device# show ip pim bsr-router
PIMv2 Bootstrap information
This system is the Bootstrap Router (BSR)
BSR address: 172.16.143.28
Uptime: 04:37:59, BSR Priority: 4, Hash mask length: 30
Next bootstrap message in 00:00:03 seconds
Next Cand_RP_advertisement in 00:00:03 seconds.
RP: 172.16.143.28(Ethernet0), Group acl: 6
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
261
show ip pim bsr-router

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English