Cisco Catalyst 3650 Series User Manual

mpls label range
To configure the range of local labels available for use with Multiprotocol Label Switching (MPLS) applications
on packet interfaces, use thempls label range command in global configuration mode. To revert to the platform
defaults, use the no form of this command.
mpls label range minimum-value maximum-value [static minimum-static-value maximum-static-value]
no mpls label range
Syntax Description
The value of the smallest label allowed in the label
space. The default is 16.
minimum-value
The value of the largest label allowed in the label
space. The default is platform-dependent.
maximum-value
(Optional) Reserves a block of local labels for static
label assignments. If you omit the static keyword and
the minimum-static-value maximum-static-value
arguments, no labels are reserved for static
assignment.
static
(Optional) The minimum value for static label
assignments. There is no default value.
minimum-static-value
(Optional) The maximum value for static label
assignments. There is no default value.
maximum-static-value
Command Default
The platform’s default values are used.
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.Cisco IOS XE Denali 16.3.1
Usage Guidelines
The labels 0 through 15 are reserved by the IETF (see RFC 3032, MPLS Label Stack Encoding, for details)
and cannot be included in the range specified in the mpls label range command. If you enter a 0 in the
command, you will get a message that indicates that the command is an unrecognized command.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
381
mpls label range

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English