match service-instance
To set the service instance to match for a service list, use the match service-instance command.
match servcie-instance line
Syntax Description
Regular expression to match service instance in packets.
line
Command Default
None
Command Modes
Service list configuration
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SE
Usage Guidelines
It is not possible to use the match command if you have used the service-list mdns-sd service-list-name
query command. The match command can be used only for the permit or deny option.
Examples
This example shows how to set the service instance to match:
Device(config-mdns-sd-sl)# match service-instance servInst 1
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
242
match service-instance