net-tcp-bufs
To display TCP buffers, use the net-tcp-bufs command in rommon mode.
net-tcp-bufs [mss]
Syntax Description
(Optional) The Maximum Segment Size (MSS)
of TCP buffers.
mss
Command Modes
Rommon
Command History
ModificationRelease
This command was introduced.Cisco IOS XE Everest 16.5.1
Usage Guidelines
You can set the MSS of TCP buffers using the mss argument.
Examples
The following is sample output from the net-tcp-bufs command:
Device: net tcp-bufs
tcp_num_buffs 4
Related Commands
DescriptionCommand
View or set the TCP MSS.net-tcp-mss
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
592
net-tcp-bufs
To Next Page
Loading...
Need help?
General