Cisco Catalyst 3650 Series User Manual

license right-to-use
To configure right-to-use access point adder licenses on the device, use the license right-to-use command
in privileged EXEC mode.
license right-to-use {activate | deactivate} apcount | ipbase | ipservices | lanbase
Syntax Description
Activates permanent or evaluation
ap-count licenses.
activate
Deactivates permanent or
evaluation ap-count licenses.
deactivate
Specifies the number of ap-count
licenses added.
You can configure the number of
adder licenses from 5 to 50.
apcount count
Activates ipbase licenses on the
switch.
ipbase count
Activates ipservices licenses on the
switch.
ipservices count
Activates lanbase licenses on the
switch.
lanbase count
Syntax Description
This command has no arguments or keywords.
Command Default
No default behavior or values.
Command Modes
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Examples
This example shows how to activate an ap-count evaluation license:
Device# license right-to-use activate apcount evaluation
Device# end
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
923
license right-to-use

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English