Cisco Catalyst 3650 Series User Manual

show authentication sessions
To display information about current Auth Manager sessions, use the show authentication sessions command.
show authentication sessions [database][handle handle-id [details]][interface type number [details][mac
mac-address [interface type number][method method-name [interface type number [details] [session-id
session-id [details]]
Syntax Description
(Optional) Shows only data stored in session database.database
(Optional) Specifies the particular handle for which Auth Manager
information is to be displayed.
handle handle-id
(Optional) Shows detailed information.details
(Optional) Specifies a particular interface type and number for which Auth
Manager information is to be displayed.
interface type number
(Optional) Specifies the particular MAC address for which you want to
display information.
mac mac-address
(Optional) Specifies the particular authentication method for which Auth
Manager information is to be displayed. If you specify a method (dot1x,
mab, or webauth), you may also specify an interface.
method method-name
(Optional) Specifies the particular session for which Auth Manager
information is to be displayed.
session-id session-id
Command Modes
User EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
Use the show authentication sessions command to display information about all current Auth Manager
sessions. To display information about specific Auth Manager sessions, use one or more of the keywords.
This table shows the possible operating states for the reported authentication sessions.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
805
show authentication sessions

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English