Voice VLAN: none
Administrative private-vlan host-association: none
Administrative private-vlan mapping: none
Administrative private-vlan trunk native VLAN: none
Administrative private-vlan trunk Native VLAN tagging: enabled
Administrative private-vlan trunk encapsulation: dot1q
Administrative private-vlan trunk normal VLANs: none
Administrative private-vlan trunk associations: none
Administrative private-vlan trunk mappings: none
Operational private-vlan: none
Trunking VLANs Enabled: 11-20
Pruning VLANs Enabled: 2-1001
Capture Mode Disabled
Capture VLANs Allowed: ALL
Protected: false
Unknown unicast blocked: disabled
Unknown multicast blocked: disabled
Appliance trust: none
DescriptionField
Displays the port name.Name
Displays the administrative and operational status of
the port. In this display, the port is in switchport
mode.
Switchport
Displays the administrative and operational modes.Administrative Mode
Operational Mode
Displays the administrative and operational
encapsulation method and whether trunking
negotiation is enabled.
Administrative Trunking Encapsulation
Operational Trunking Encapsulation
Negotiation of Trunking
Displays the VLAN ID to which the port is
configured.
Access Mode VLAN
Lists the VLAN ID of the trunk that is in native mode.
Lists the allowed VLANs on the trunk. Lists the active
VLANs on the trunk.
Trunking Native Mode VLAN
Trunking VLANs Enabled
Trunking VLANs Active
Lists the VLANs that are pruning-eligible.Pruning VLANs Enabled
Displays whether or not protected port is enabled
(True) or disabled (False) on the interface.
Protected
Displays whether or not unknown multicast and
unknown unicast traffic is blocked on the interface.
Unknown unicast blocked
Unknown multicast blocked
Displays the VLAN ID on which voice VLAN is
enabled.
Voice VLAN
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
84
show interfaces switchport
To Next Page
Loading...
Need help?
General