Cisco Catalyst 3650 Series User Manual

copy tftp: startup-config
To copy the configuration settings from a TFTP server onto a new switch, use the copy tftp: startup-config
command in Privileged EXEC mode on the new switch.
copy tftp: startup-config remote host {ip-address}/{name}
Syntax Description
Host name or IP-address of Remote host.
remote host {ip-address}/{name}
Command Default
No default behavior or values.
Command Modes
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS XE Release 16.1
Usage Guidelines
After the configurations are copied, to save your configurations, use write memory command and then either
reload the switch or run the copy startup-config running-config command.
Examples
This example shows how to copy the configuration settings from the TFTP server onto a switch:
Device: copy tftp: startup-config
Address or name of remote host []?
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
913
copy tftp: startup-config

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English