Cisco Catalyst 3650 Series User Manual

Channel group 1
Dual-Active Partner Partner Partner
Port Detect Capable Name Port Version
Gi1/0/1 No Device Gi3/0/3 N/A
Gi1/0/2 No Device Gi3/0/4 N/A
<output truncated>
This is an example of output from the show pagp 1 internal command:
Device> show pagp 1 internal
Flags: S - Device is sending Slow hello. C - Device is in Consistent state.
A - Device is in Auto mode.
Timers: H - Hello timer is running. Q - Quit timer is running.
S - Switching timer is running. I - Interface timer is running.
Channel group 1
Hello Partner PAgP Learning Group
Port Flags State Timers Interval Count Priority Method Ifindex
Gi1/0/1 SC U6/S7 H 30s 1 128 Any 16
Gi1/0/2 SC U6/S7 H 30s 1 128 Any 16
This is an example of output from the show pagp 1 neighbor command:
Device> show pagp 1 neighbor
Flags: S - Device is sending Slow hello. C - Device is in Consistent state.
A - Device is in Auto mode. P - Device learns on physical port.
Channel group 1 neighbors
Partner Partner Partner Partner Group
Port Name Device ID Port Age Flags Cap.
Gi1/0/1 device-p2 0002.4b29.4600 Gi01//1 9s SC 10001
Gi1/0/2 device-p2 0002.4b29.4600 Gi1/0/2 24s SC 10001
Related Commands
DescriptionCommand
Clears PAgP channel-group information.
clear pagp
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
346
show pagp

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English