Cisco Catalyst 3650 Series User Manual

show cts interface
To display Cisco TrustSec (CTS) configuration statistics for an interface, use the show cts interface command
in EXEC or privileged EXEC mode.
show cts interface [type slot/port| brief| summary]
Syntax Description
(Optional) Specifies an interface type and slot or port
number. A verbose output for this interface is
returned.
type slot/port
(Optional) Displays abbreviated status for all CTS
interfaces.
brief
(Optional) Displays a tabular summary of all CTS
interfaces with 4 or 5 key status fields for each
interface.
summary
Command Default
None
Command Modes
EXEC (>) Privileged EXEC (#)
Command History
ModificationRelease
This command was modified with additional options.Cisco IOS XE Denali 16.3.1
This command was introduced.Cisco IOS XE Denali 16.2.1
Usage Guidelines
Use the show cts interface command without keywords to display verbose status for all CTS interfaces.
Examples
The following example displays output without using a keyword (verbose status for all CTS interfaces):
Switch# show cts interface
Global Dot1x feature is Disabled
Interface GigabitEthernet0/1/0:
CTS is enabled, mode: MANUAL
IFC state: OPEN
Interface Active for 00:00:18.232
Authentication Status: NOT APPLICABLE
Peer identity: "unknown"
Peer's advertised capabilities: ""
Authorization Status: NOT APPLICABLE
SAP Status: NOT APPLICABLE
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
808
show cts interface

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English