Cisco Catalyst 3650 Series User Manual

net6-show
To display IPv6 network parameters, use the net6-show command in rommon mode.
net6-show
This command has no arguments or keywords.
Command Modes
Rommon
Command History
ModificationRelease
This command was introduced.Cisco IOS XE Everest 16.5.1
Usage Guidelines
Examples
The following is sample output from the net6-show command:
Device: net6-show
switch: net6-show
IP6 addresses
link-local addr fe80::366f:90ff:feb8:cb80
site-local addr fec0::366f:90ff:feb8:cb80
DHCP addr 2001:dead:beef:cafe::9999
router addr fe80::7ada:6eff:fe13:8580
SLAAC addr 2001:dead:beef:cafe:366f:90ff:feb8:cb80 /64
SLAAC addr f00d::366f:90ff:feb8:cb80 /64
SLAAC addr feed::366f:90ff:feb8:cb80 /64
--
null addr ::
all-nodes addr ff02::1
all-routers addr ff02::2
all-dhcp addr ff02::1:2
Slct-node addr ff02::1:ffb8:cb80
ll mmac addr 33:33:00:00:00:01
sl mmac addr 33:33:00:00:00:02
sn mmac addr 33:33:ff:b8:cb:80
dhcp mmac addr 33:33:ff:00:99:99
router mac addr 78:da:6e:13:85:80
IP6 neighbour table
0: ip6 fec0::366f:90ff:feb8:cb80 MAC 34:6f:90:b8:cb:80
1: ip6 fe80::366f:90ff:feb8:cb80 MAC 34:6f:90:b8:cb:80
2: ip6 fe80::7ada:6eff:fe13:8580 MAC 78:da:6e:13:85:80
3: ip6 2001:dead:beef:cafe::5 MAC 30:f7:0d:08:7e:bd
4: ip6 fe80::32f7:dff:fe08:7ebd MAC 30:f7:0d:08:7e:bd
Related Commands
DescriptionCommand
Displays network parameters.net-show
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
591
net6-show

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English