Cisco Catalyst 3650 Series User Manual

ip multicast auto-enable
To support authentication, authorization, and accounting (AAA) enabling of IP multicast, use the ip multicast
auto-enable command. This command allows multicast routing to be enabled dynamically on dialup interfaces
using AAA attributes from a RADIUS server. To disable IP multicast for AAA, use the no form of the
command.
ip multicast auto-enable
no ip multicast auto-enable
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SE
Usage Guidelines
None
This command is unavailable when using the LAN Base image.
Examples
This example shows how to enable authentication, authorization, and accounting (AAA) on IP multicast:
Device(config)# ip multicast auto-enable
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
231
ip multicast auto-enable

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English