Examples
The following example configures the use of the source MAC addresses of packets that are transmitted by
the device as a key field for a flow record:
Device(config)# flow record FLOW-RECORD-1
Device(config-flow-record)# match datalink mac source address output
The following example configures the use of the destination MAC address of packets that are received by the
device as a key field for a flow record:
Device(config)# flow record FLOW-RECORD-1
Device(config-flow-record)# match datalink mac destination address input
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
441
match datalink mac