Cisco Catalyst 3650 Series User Manual

reset
To perform a hard reset on the system, use the reset command in boot loader mode. A hard reset is similar
to power-cycling the device; it clears the processor, registers, and memory.
reset
Syntax Description
This command has no arguments or keywords.
Command Default
No default behavior or values.
Command Modes
Boot loader
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Examples
This example shows how to reset the system:
Device: reset
Are you sure you want to reset the system (y/n)? y
System resetting...
Related Commands
DescriptionCommand
Performs a hard reset on the system.
reset
Performs a hard reset on the system.
reset
Runs the Time Domain Reflector (TDR) feature on an interface.
test cable-diagnostics tdr
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
937
reset

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English