Cisco Catalyst 3650 Series User Manual

show mgmt-infra trace messages ilpower-ha
To display inline power high availability messages within a trace buffer, use the show mgmt-infra trace
messages ilpower-ha command in privileged EXEC mode.
show mgmt-infra trace messages ilpower-ha [switch stack-member-number]
Syntax Description
(Optional) Specifies the stack member number for which to display
inline power messages within a trace buffer.
switch stack-member-number
Command Default
None
Command Modes
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SE
Examples
This is an output example from the show mgmt-infra trace messages ilpower-ha command:
Device# show mgmt-infra trace messages ilpower-ha
[10/23/12 14:04:48.087 UTC 1 3] NG3K_ILPOWER_HA: Created NGWC ILP CF client succ
essfully.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
95
show mgmt-infra trace messages ilpower-ha

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English