inspect—Gleans addresses, validates messages for consistency and conformance, and enforces
address ownership.
• (Optional) tracking {disable | enable}—Specifies a tracking option.
• (Optional) trusted-port—Sets up a trusted port. It disables the guard on applicable targets. Bindings
learned through a trusted port have preference over bindings learned through any other port. A trusted
port is given preference in case of a collision while making an entry in the table.
Examples
This example shows how to configure an a device-tracking policy:
Device(config)# device-tracking policy policy1
Device(config-device-tracking)# trusted-port
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
746
device-tracking policy