Cisco Catalyst 3650 Series User Manual

show platform software ilpower
To display the inline power details of all the PoE ports on the device, use the show platform software ilpower
command in privileged EXEC mode.
show platform software ilpower {details | port {GigabitEthernet interface-number } | system slot-number
}
Syntax Description
Displays inline power details for all the interfaces.details
Displays inline power port configuration.port
The GigabitEthernet interface number. Values range from 0 to 9.
GigabitEthernet interface-number
Displays inline power system configuration.
system slot-number
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was modified. The
keyword details argument was
added.
Cisco IOS XE Denali 16.3.2
The command was introduced.Cisco IOS XE Denali 16.1.1
Examples
The following is sample output from the show platform software ilpower details command:
Device# show platform software ilpower details
ILP Port Configuration for interface Gi1/0/1
Initialization Done: Yes
ILP Supported: Yes
ILP Enabled: Yes
POST: Yes
Detect On: No
Powered Device Detected No
Powered Device Class Done No
Cisco Powered Device: No
Power is On: No
Power Denied: No
Powered Device Type: Null
Powerd Device Class: Null
Power State: NULL
Current State: NGWC_ILP_DETECTING_S
Previous State: NGWC_ILP_SHUT_OFF_S
Requested Power in milli watts: 0
Short Circuit Detected: 0
Short Circuit Count: 0
Cisco Powerd Device Detect Count: 0
Spare Pair mode: 0
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
101
show platform software ilpower

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English