Cisco Catalyst 3650 Series User Manual

show install
To display information about install packages, use the show install command in privileged EXEC mode.
show install {active | committed | inactive | log | package {bootflash: | flash: | webui:}| rollback | summary
| uncommitted}
Syntax Description
Displays information about active packages.active
Displays package activations that are persistent.committed
Displays inactive packages.inactive
Displays entries stored in the logging installation
buffer.
log
Displays metadata information about the package,
including description, restart information,
components in the package, and so on.
package
Specifies the location of the install package.{bootflash: | flash: | webui:}
Displays the software set associated with a saved
installation.
rollback
Displays information about the list of active,
inactive, committed, and superseded packages.
summmary
Displays package activations that are nonpersistent.uncommitted
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was introduced.Cisco IOS XE Everest 16.5.1
Usage Guidelines
Use the show commands to view the status of the install package.
Examples
The following is sample output from the show install package command:
Device# show install package bootflash:isr4300-universalk9.16.05.01.CSCxxxxxxx.dmp.bin
Name: isr4300-universalk9.16.05.01.CSCxxxxxxx.dmp.bin
Version: 16.5.1.0.199.1484082952..Everest
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
581
show install

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English