Cisco Catalyst 3650 Series User Manual

show autonomic neighbor
To display information about autonomic neighbors, use the show autonomic neighbor command in privileged
EXEC mode.
show autonomic neighbor [detail]
Syntax Description
(Optional) Displays detailed information.detail
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was introduced.Cisco IOS XE Denali 16.3.1
Examples
The following is sample output from the show autonomic neighbor command:
Device# show autonomic neighbor
UDI Device-ID Domain Interface
--------------------------------------------------------------------------------
PID:WS-C3850-24U SN:FCW1934D05Z e865.493b.acfb-5 cisco.com ANI1
The following is sample output from the show autonomic neighbor detail command:
Device# show autonomic neighbor detail
UDI: "PID:WS-C3850-24U SN:FCW1934D05Z"
Device ID e865.493b.acfb-5
Domain ID cisco.com
Address FD08:2EEF:C2EE:0:E865:493B:ACFB:5
State Nbr inside the Domain
Credential Domain Cert
Credential Validation Passed
Last Validated Time 2016-07-15 05:48:37 UTC
Certificate Expiry Date 2017-07-15 05:30:39 UTC
Certificate Expire Countdown 31534693 (secs)
Number of Links connected 1
Link:
Local Interface: ANI2
Remote Interface: ANI2
IP Address: FE80::3A20:56FF:FEF3:7158
Uptime(Discovered Time): 00:14:21 ( 2016-07-15 05:38:05 UTC)
Last Refreshed time: 0 seconds ago
The following table describes the significant fields shown in the display.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
901
show autonomic neighbor

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English