DescriptionCommand
Specifies the load-balancing method used by the AVG
of GLBP.
glbp load-balancing
Configures the gateway to take over as AVG for a
GLBP group if it has higher priority than the current
AVG.
glbp preempt
Sets the priority level of the gateway within a GLBP
group.
glbp priority
Configures the time between hello packets sent by
the GLBP gateway and the time for which the virtual
gateway and virtual forwarder information is
considered valid.
glbp timers
Configures the time during which the AVG for a
GLBP group continues to redirect clients to a
secondary AVF.
glbp timers redirect
Specifies the initial weighting value of the GLBP
gateway.
glbp weighting
Specifies a tracking object where the GLBP weighting
changes based on the availability of the object being
tracked.
glbp weighting track
Displays GLBP information.show glbp
Configures an interface to be tracked where the GLBP
weighting changes based on the state of the interface.
track
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
157
glbp name
To Next Page
Loading...
Need help?
General