Cisco Catalyst 3650 Series User Manual

debug sw-vlan vtp
To enable debugging of the VLAN Trunking Protocol (VTP) code, use the debug sw-vlan vtp command in
privileged EXEC mode. To disable debugging, use the no form of this command.
debug sw-vlan vtp {events| packets| pruning [packets| xmit]| redundancy| xmit}
no debug sw-vlan vtp {events| packets| pruning| redundancy| xmit}
Syntax Description
Displays debug messages for general-purpose logic flow and detailed VTP
messages generated by the VTP_LOG_RUNTIME macro in the VTP code.
events
Displays debug messages for the contents of all incoming VTP packets
that have been passed into the VTP code from the Cisco IOS VTP
platform-dependent layer, except for pruning packets.
packets
Displays debug messages generated by the pruning segment of the VTP
code.
pruning
(Optional) Displays debug messages for the contents of all incoming VTP
pruning packets that have been passed into the VTP code from the Cisco
IOS VTP platform-dependent layer.
packets
(Optional) Displays debug messages for the contents of all outgoing VTP
packets that the VTP code requests the Cisco IOS VTP platform-dependent
layer to send.
xmit
Displays debug messages for VTP redundancy.redundancy
Displays debug messages for the contents of all outgoing VTP packets that
the VTP code requests the Cisco IOS VTP platform-dependent layer to
send, except for pruning packets.
xmit
Command Default
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
The undebug sw-vlan vtp command is the same as the no debug sw-vlan vtp command.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
1014
debug sw-vlan vtp

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English