EasyManuals Logo
Home>Cisco>Switch>Catalyst 3650 Series

Cisco Catalyst 3650 Series User Manual

Cisco Catalyst 3650 Series
1108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #630 background imageLoading...
Page #630 background image
•
AutoQos-4.0-Output-Scavenger-Queue (match-any)
•
AutoQos-4.0-Output-Multimedia-Strm-Queue (match-any)
To disable auto-QoS on a port, use the no auto qos classify interface configuration command. Only the
auto-QoS-generated interface configuration commands for this port are removed. If this is the last port on
which auto-QoS is enabled and you enter the no auto qos classify command, auto-QoS is considered disabled
even though the auto-QoS-generated global configuration commands remain (to avoid disrupting traffic on
other ports affected by the global configuration).
Examples
This example shows how to enable auto-QoS classification of an untrusted device and police traffic:
Device(config)# interface gigabitEthernet1/0/6
Device(config-if)# auto qos classify police
Device(config-if)# end
Device# show policy-map interface gigabitEthernet1/0/6
GigabitEthernet1/0/6
Service-policy input: AutoQos-4.0-Classify-Police-Input-Policy
Class-map: AutoQos-4.0-Multimedia-Conf-Class (match-any)
0 packets
Match: access-group name AutoQos-4.0-Acl-MultiEnhanced-Conf
0 packets, 0 bytes
5 minute rate 0 bps
QoS Set
dscp af41
police:
cir 5000000 bps, bc 156250 bytes
conformed 0 bytes; actions:
transmit
exceeded 0 bytes; actions:
drop
conformed 0000 bps, exceed 0000 bps
Class-map: AutoQos-4.0-Bulk-Data-Class (match-any)
0 packets
Match: access-group name AutoQos-4.0-Acl-Bulk-Data
0 packets, 0 bytes
5 minute rate 0 bps
QoS Set
dscp af11
police:
cir 10000000 bps, bc 312500 bytes
conformed 0 bytes; actions:
transmit
exceeded 0 bytes; actions:
set-dscp-transmit dscp table policed-dscp
conformed 0000 bps, exceed 0000 bps
Class-map: AutoQos-4.0-Transaction-Class (match-any)
0 packets
Match: access-group name AutoQos-4.0-Acl-Transactional-Data
0 packets, 0 bytes
5 minute rate 0 bps
QoS Set
dscp af21
police:
cir 10000000 bps, bc 312500 bytes
conformed 0 bytes; actions:
transmit
exceeded 0 bytes; actions:
set-dscp-transmit dscp table policed-dscp
conformed 0000 bps, exceed 0000 bps
Class-map: AutoQos-4.0-Scavanger-Class (match-any)
0 packets
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
604
auto qos classify

Table of Contents

Other manuals for Cisco Catalyst 3650 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Catalyst 3650 Series and is the answer not in the manual?

Cisco Catalyst 3650 Series Specifications

General IconGeneral
BrandCisco
ModelCatalyst 3650 Series
CategorySwitch
LanguageEnglish

Related product manuals