Cisco Catalyst 3650 Series User Manual

show class-map
To display quality of service (QoS) class maps, which define the match criteria to classify traffic, use the
show class-map command in EXEC mode.
show class-map [class-map-name | type control subscriber {all | class-map-name}]
Syntax Description
(Optional) Class map name.
class-map-name
(Optional) Displays information about control class maps.type control subscriber
(Optional) Displays information about all control class maps.all
Command Modes
User EXEC
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Examples
This is an example of output from the show class-map command:
Device# show class-map
Class Map match-any videowizard_10-10-10-10 (id 2)
Match access-group name videowizard_10-10-10-10
Class Map match-any class-default (id 0)
Match any
Class Map match-any dscp5 (id 3)
Match ip dscp 5
Related Commands
DescriptionCommand
Creates a class map to be used for matching packets to the class whose name
you specify and enters class-map configuration mode.
class-map
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
667
show class-map

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English