Cisco Catalyst 3650 Series User Manual

Table 12: Valid Types, Number Ranges, and Interface Descriptions
Interface DescriptionsNumber RangesValid Types
Autonomic-Networking virtual interface0 to 1000ANI
Auto-Template interface1 to 999Auto-Template
Multiprotocol Label Switching (MPLS)
interface
0 to 1000GMPLS
GigabitEthernet IEEE 802.3z0 to 9GigabitEthernet
Internal interface0 to 9InternalInterface
Locator/ID Separation Protocol (LISP) virtual
interface
0 to 65520LISP
Loopback interface0 to 2147483647loopback
Null interface0 to 0Null
Protection-group controller0 to 0PROTECTION_GROUP
Port channel interface1 to 128Port-channel
TenGigabitEthernet interface0 to 9TenGigabitEthernet
Tunnel interface0 to 2147483647Tunnel
MPLS Transport Profile interface0 to 65535Tunnel-tp
VLAN interface1 to 4094Vlan
Examples
The following is sample output from the show ip nhrp nhs detail command:
Switch# show ip nhrp nhs detail
Legend:
E=Expecting replies
R=Responding
Tunnel1:
10.1.1.1 E req-sent 128 req-failed 1 repl-recv 0
Pending Registration Requests:
Registration Request: Reqid 1, Ret 64 NHS 10.1.1.1
The table below describes the significant field shown in the display.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
192
show ip nhrp nhs

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English