Examples
This is an example of partial output from the show interfaces counters command. It displays all counters for
the switch.
Device# show interfaces counters
Port InOctets InUcastPkts InMcastPkts InBcastPkts
Gi1/0/1 0 0 0 0
Gi1/0/2 0 0 0 0
Gi1/0/3 95285341 43115 1178430 1950
Gi1/0/4 0 0 0 0
<output truncated>
This is an example of partial output from the show interfaces counters module command for stack member
2. It displays all counters for the specified switch in the stack.
Device# show interfaces counters module 2
Port InOctets InUcastPkts InMcastPkts InBcastPkts
Gi1/0/1 520 2 0 0
Gi1/0/2 520 2 0 0
Gi1/0/3 520 2 0 0
Gi1/0/4 520 2 0 0
<output truncated>
This is an example of partial output from the show interfaces counters protocol status command for all
interfaces:
Device# show interfaces counters protocol status
Protocols allocated:
Vlan1: Other, IP
Vlan20: Other, IP, ARP
Vlan30: Other, IP, ARP
Vlan40: Other, IP, ARP
Vlan50: Other, IP, ARP
Vlan60: Other, IP, ARP
Vlan70: Other, IP, ARP
Vlan80: Other, IP, ARP
Vlan90: Other, IP, ARP
Vlan900: Other, IP, ARP
Vlan3000: Other, IP
Vlan3500: Other, IP
GigabitEthernet1/0/1: Other, IP, ARP, CDP
GigabitEthernet1/0/2: Other, IP
GigabitEthernet1/0/3: Other, IP
GigabitEthernet1/0/4: Other, IP
GigabitEthernet1/0/5: Other, IP
GigabitEthernet1/0/6: Other, IP
GigabitEthernet1/0/7: Other, IP
GigabitEthernet1/0/8: Other, IP
GigabitEthernet1/0/9: Other, IP
GigabitEthernet1/0/10: Other, IP, CDP
<output truncated>
This is an example of output from the show interfaces counters trunk command. It displays trunk counters
for all interfaces.
Device# show interfaces counters trunk
Port TrunkFramesTx TrunkFramesRx WrongEncap
Gi1/0/1 0 0 0
Gi1/0/2 0 0 0
Gi1/0/3 80678 0 0
Gi1/0/4 82320 0 0
Gi1/0/5 0 0 0
<output truncated>
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
82
show interfaces counters