Cisco Catalyst 3650 Series User Manual

port-channel
To convert the auto created EtherChannel into a manual channel and adding configuration on the EtherChannel,
use the port-channel command in privileged EXEC mode.
port-channel {channel-group-number persistent | persistent }
Syntax Description
Channel group number. The range is 1 to 128.
channel-group-number
Converts the auto created EtherChannel into a manual channel and allows
you to add configuration on the EtherChannel.
persistent
Command Default
None
Command Modes
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.7.2E
Usage Guidelines
You can use the show etherchannel summary privileged EXEC command to display the EtherChannel
information.
Examples
This example shows how to convert the auto created EtherChannel into a manual channel:
Device# port-channel 1 persistent
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
318
port-channel

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English