Cisco Catalyst 3650 Series User Manual

show platform pm
To display platform-dependent port manager information, use the show platform pm command in privileged
EXEC mode.
show platform pm {etherchannel channel-group-number group-mask| interface-numbers| port-data
interface-id| port-state| spi-info| spi-req-q}
Syntax Description
Displays the EtherChannel group-mask table for the specified
channel group. The range is 1 to 128.
etherchannel channel-group-number
group-mask
Displays interface numbers information.interface-numbers
Displays port data information for the specified interface.
port-data interface-id
Displays port state information.port-state
Displays stateful packet inspection (SPI) information.spi-info
Displays stateful packet inspection (SPI) maximum wait time for
acknowledgment.
spi-req-q
Command Default
None
Command Modes
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
Use this command only when you are working directly with your technical support representative while
troubleshooting a problem.
Do not use this command unless your technical support representative asks you to do so.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
348
show platform pm

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English