Cisco Catalyst 3650 Series User Manual

This is an example of output from the show eee capabilities command on an interface where EEE is not
enabled:
Device# show eee capabilities interface gigabitethernet2/0/1
Gi2/0/1
EEE(efficient-ethernet): not enabled
Link Partner : not enabled
This is an example of output from the show eee status command on an interface where EEE is enabled and
operational. The table that follows describes the fields in the display.
Device# show eee status interface gigabitethernet1/0/4
Gi1/0/4 is up
EEE(efficient-ethernet): Operational
Rx LPI Status : Received
Tx LPI Status : Received
This is an example of output from the show eee status command on an interface where EEE operational and
the ports are in low power save mode:
Device# show eee status interface gigabitethernet1/0/3
Gi1/0/3 is up
EEE(efficient-ethernet): Operational
Rx LPI Status : Low Power
Tx LPI Status : Low Power
Wake Error Count : 0
This is an example of output from the show eee status command on an interface where EEE is not enabled
because a remote link partner is incompatible with EEE:
Device# show eee status interface gigabitethernet1/0/3
Gi1/0/3 is down
EEE(efficient-ethernet): Disagreed
Rx LPI Status : None
Tx LPI Status : None
Wake Error Count : 0
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
68
show eee

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English