Cisco Catalyst 3650 Series User Manual

clear pagp
To clear the Port Aggregation Protocol (PAgP) channel-group information, use the clear pagp command in
privileged EXEC mode.
clear pagp [channel-group-number] counters
Syntax Description
(Optional) Channel group number. The range is 1 to 128.
channel-group-number
Clears traffic counters.counters
Command Default
None
Command Modes
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
You can clear all counters by using the clear pagp counters command, or you can clear only the counters
for the specified channel group by using the clear pagp channel-group-number counters command.
Examples
This example shows how to clear all channel-group information:
Device# clear pagp counters
This example shows how to clear PAgP traffic counters for group 10:
Device# clear pagp 10 counters
You can verify that the information was deleted by entering the show pagp privileged EXEC command.
Related Commands
DescriptionCommand
Enables debugging of PAgP.
debug pagp
Displays Port Aggregation Protocol (PAgP) channel-group information.
show pagp
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
292
clear pagp

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English