Cisco Catalyst 3650 Series User Manual

no dot1x logging verbose
To filter detailed information from 802.1x system messages, use the no dot1x logging verbose command in
global configuration mode on the switch stack or on a standalone switch.
no dot1x logging verbose
Syntax Description
This command has no arguments or keywords.
Command Default
All details are not displayed in the system messages.
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
This command filters details, such as anticipated success, from 802.1x system messages. Failure messages
are not filtered.
Examples
To filter verbose 802.1x system messages:
Device(config)# no dot1x logging verbose
You can verify your settings by entering the show running-config privileged EXEC command.
Related Commands
DescriptionCommand
Filters details from authentication system messages.no authentication logging verbose
Filters details from 802.1x system messages.no dot1x logging verbose
Filters details from MAC authentication bypass (MAB)
system messages.
no mab logging verbose
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
787
no dot1x logging verbose

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English