15 February 2006 COPY CONNECTOR KITS
1-121
Installation
Installing the Hardware
1. Replace the interface board [A] with the MLB Interface Board [B].
NOTE: This step is not necessary from the following Serial Numbers:
Part Number Serial Number Part Number Serial Number
B06417 J4235300054 B06517 J4335300191
B06419 J42304XXXXX B06519 J43304XXXXX
B06422 J42304XXXXX B06522 J43304XXXXX
B06424 L1283040001 B06524 L1293040001
B06426 7P10430001 B06526 7P20430001
B06427 J4230300409 B06527 J43304XXXXX
B06428 J42304XXXXX B06528 J43304XXXXX
B06429 J42304XXXXX B06529 J43304XXXXX
B06469 J42304XXXXX B06569 J43304XXXXX
2. Remove the 4P connector [C] for the HDD and connect it to CN319 on the MLB
Board.
3. Connect one end of the power interface harness [D] to the HDD connector, and
the other end to CN318 on the MLB Board.
B110I201.WMF
B110I202.WMF
[A]
[B]
[C]
[D]
To Next Page
Loading...
Need help?
General
